Non-sparking tools the use of Should avoid

Author：Snailtools  Dates：2015-5-10

Non-sparkiong tool even though it can be used in special circumstances, however, when used in accordance with different situations should operate when normal use, if not, there may be a problem, the following is proof tools when problems should be avoided.

1, Non-sparkiong wrench, socket wrench small generation of large, cased or lengthen sleeves pull mouth caused by deformation, fracture, bending to pull the handle portion, deformation, Duanzhe; non-knocking as a spanner wrench as proof Pratia use will resulting in deformation of the wrench head and so on.

2, Non-sparkiong socket head used on manually operated pneumatic tools, can lead to the location of the square hole of the sleeve head is damaged, when action should wind industry in selecting pneumatic sleeve series.

3. Use pliers head as a hammer, it will cause a dent or clamp jaws bite does not work, please use the percussion work to do proper proof copper hammer etc. percussion instruments. Use needle-nose pliers proof strength when bent wire, sheet metal, it will also cause injuries or needle nose pliers clamp bite mouth appear appear inappropriate and so on.

4, Non-sparkiong ratchet wrench tap wrench or a set of extended operation, enables the handle and work off dents, this situation is to use a T-type sliding head handle sleeve plus best, F-type pull rod, tang-type pull bar or choose standard ratchet wrench large increase in torque.

5, Non-sparkiong screwdriver as small flathead or flat shovel crowbar, chisel, chisel subclasses, will cause the handle portion loose or broken out of touch with the working end, or on behalf of mostly small screwdriver working end may cause injuries or damage to the blade appear.

Previous Page：Non-sparking Pliers Note the use

Next Page：Non-sparking tools Abnormal use of rollup