Non-sparking tools Use Method

Author：Snailtools  Dates：2015-5-11

Non-sparking tools steel tools can not be compared to his performance is far less than the steel tool, such as: explosion of all kinds of hand tools, wrenches, have a different rated strength, non-cased overload (except tap wrench outside) not struck, in order to avoid fracture and deformation due to overloading, affecting the normal use. Use explosion-proof tool in the process should be a reasonable choice of different specifications according to need not be large to small generations. It should also be noted that the use of wrenches, pliers, wrenches time, pay attention to the direction of the force requirements, shall be arbitrarily reverse force when using tool belt edge, first measuring the hardness of the workpiece itself, such as its hardness close When the tool hardness, should have to be careful operation, prohibit the use of higher tool hardness. When the workpiece is fastened by a motorized, semi-permanent or for a fixed long-term corrosion, and before using hand tools without additional measures should be banned, in order to avoid damage to the tool.

Non-sparking tools material difference
Proof tool material mainly two materials: aluminum bronze alloy beryllium alloy aluminum bronze alloy explosion-proof tools: a national second-class B-class products, not detonated gas at concentrations of 7.8% of the ethylene gas environmental practices; beryllium alloy explosion tools: is a national second-class C-class products, not detonated gas concentration of 21% hydrogen gas environment operations. And beryllium bronze proof tools not magnetic (magnetic to 0), it is also an ideal tool for field operations environment, foreign customer Non-magnetic tools.

Non-sparking tools management
Use explosion-proof tool has been completed, should be promptly wipe clean, such as long-term need, should be coated with a layer of oil in the explosion-proof tools appearance or save and load the bags with anti-corrosion method or inward storage. Some proof tools after use some wear and incomplete, especially with the edge of explosion-proof tools, or serious damage, should not continue to use, it should be into the waste.

Previous Page：Non-sparking Commonly Tools

Next Page：Non-sparking tools Note the use