Non-sparking Pliers Note the use

Author：Snailtools  Dates：2015-5-10

Non-sparking pliers as a common tool, its strength is limited, it can not be enough for the general operation of the power of the reach of hand work. General is likely to damage the jaws especially smaller models or ordinary explosion needle nose pliers, with its high-intensity bar bending sheet metal.

Non-sparking pliers Caution:
Non-sparking pliers as a common tool, its strength is limited, it can not be enough for the general operation of the power of the reach of hand work. General is likely to damage the jaws especially smaller models or ordinary explosion needle nose pliers, with its high-intensity bar bending sheet metal.

◇ Non-sparking pliers with three cutting edges, can only be used to cut the wire, do not be used to cut the wire.

◇ clamp handle only with hand, do not use other methods such as using the hammer to hit the afterburner and so on.

Insulated pliers pipe explosion-proof plastic ◇ conventional voltage above 500V, with insulating plastic tube can be cut live wire. Avoid the use of throw, chaos hit, so as not to damage the insulating plastic pipe leakage wounding incident occurred.

◇ Non-sparking pliers not be used as a hammer to use.

◇ Avoid using simultaneous explosion Cutting pliers cut double-stranded live line, so as not to cause a short circuit accident.

Previous Page：Non-sparking tools Types and Performance Overview

Next Page：Non-sparking tools the use of Should avoid