Non-sparking tools Note the use

Author：Snailtools  Dates：2015-5-10

Non-sparking tools before use to remove surface oil, after use to wipe the surface of oil and sediments, place dry place, with the corrosive substance stored separately, a long time without the right amount of lubricating oil is stored should be applied. Striking tools can not continuously struck, more than ten times shall be appropriately intermittently, while the timely removal tool percussion parts, stained debris is struck before you continue. Safety Tool Manufacturers remind knock, smashing the actual operation type explosion-proof tools to promptly remove the debris and the face corrosion field oxide, to prevent third strike sparks.

Explosion combination of tools: Ex overhaul combination of tools, gas-proof combination tool, dedicated depot explosion-proof combination tool, dedicated natural gas-proof combination of tools, mine rescue and mine-proof combination tool of its components generally: wrench explosion, explosion-proof combination wrenches stay Mei , explosion-proof hex wrench, explosion-proof socket head, explosion-proof needle nose pliers, pliers proof, explosion-proof pliers, hammer test explosion, explosion-proof sliding head handle, explosion Phillips screwdriver, flathead screwdriver-proof, explosion-proof flat shovel, brush, etc. Explosion ; the specific situation can be customized according to customer kits.
1, explosion-proof wrench, socket wrench small generation of large, cased or lengthen sleeves pull mouth caused by deformation, fracture, bending to pull the handle portion, deformation, Duanzhe; non-knocking as a spanner wrench as proof Pratia use will resulting in deformation of the wrench head and so on.
2, explosion-proof socket head manually using the pneumatic tool operations, will result in a square hole socket head at the obvious damage, slipping sleeve wall has obvious cracks and other phenomena, when the wind action should select the wind industry in the sleeve series.
3, explosion as small flathead screwdriver or flat shovel crowbar, chisel, chisel subclasses, will cause the handle portion loose or broken out of touch with the working end, or on behalf of mostly small screwdriver working end may cause injuries or damage to the blade appear.
4, explosion-proof ratchet wrench tap wrench or make use of the extension tube sets, and work off the handle will cause significant dent, in which case you should choose a T-handle plus the heads of the sleeve, F-type pull rod, tang-type pull bar or choose the larger size to increase the torque ratchet wrench!
5. Use pliers head as a hammer, it will cause a dent or clamp jaws bite does not work, please use the percussion work to do proper proof copper hammer etc. percussion instruments. Use needle-nose pliers proof strength when bent wire, sheet metal, it will also cause injuries or needle nose pliers clamp bite mouth appear appear inappropriate and so on.

Previous Page：Non-sparking tools Use Method

Next Page：Non-sparking tools Highly dangerous area Note the use